Resin bonded grinding wheels

z_1

1 - STRAIGHT GRINDING WHEELS; 5 - WHEELS RECESSED ON ONE SIDE; 7 - WHEELS RECESSED ON BOTH SIDES; The Type 1 straight grinding wheels, both non-reinforced and reinforced with fibreglass discs or/and steel rings and, if necessary - with fine grit zone, form the most numerous group of general purpose and specialized abrasive tools.

z_2

2 - CYLINDER WHEELS; 37 - CYLINDER WHEELS WITH THREADED INSERTS; 3701 - CYLINDER WHEELS WITH THREADED INSERTS, RELIEVED ON ONE SIDE AND SLOTS ON THE OPPOSITE SIDE; 3703 - CYLINDER WHEELS WITH THREADED INSERTS, RELIEVED ON ONE SIDE;

z_4

4 - WHEELS TAPERED ON BOTH SIDES; Due to their design and concave steel flanges, the Type 4 grinding wheels are protected against the possibility of slip off of wheel fragments. They are used for rough grinding on steel, cast iron, cast steel, aluminium, bronze and other materials.

walki

18 - CYLINDRICAL PLUGS WITH THREADED INSERTS; 18R - CYLINDRICAL PLUGS WITH A ROUND NOSE, WITH THREADED INSERTS; 19 - CYLINDER-CONICAL PLUGS WITH THREADED INSERTS; 1801 - CYLINDER WHEELS WITH SPHERICAL WORKING SURFACE

z_6

6 - STRAIGHT CUP WHEELS; 6001, 6002, 6003 - STRAIGHT CUP WHEELS WITH A CENTRAL THREADED INSERT; The Type 6 grinding wheels are manufactured in two design solutions, one with a through bore and the other one with a central threaded insert.

z_11

11 - TAPER CUP WHEELS; 1112, 1113, 1114 - TAPER CUP WHEELSWITH A CENTRAL THREADED INSERT; The Type 11 grinding wheels are manufactured in various design solutions: with a through bore, with a central threaded insert-and and with reinforced bottom.

z_35

35 - DISC WHEEL; 3501 - DISC WHEEL WITH SLOTS; 3504 - DISC WHEELS RELIEVED ON ONE SIDE AND SLOTS ON THE OPPOSITE SIDE; The Type 3501 and Type 3504 disc wheels are intended for grinding on terrazzo, concrete, stone, ceramics, etc., in building and stonework industries for example.

z_3502

3502 - DISC WHEEL WITH A SPIRAL FOR QUICK-CHANGE MOUNTING; 3503 - DISC WHEEL WITH A TAPERED HOLE AND WITH A SPIRAL FOR QUICK-CHANGE MOUNTING; 1102 - TAPER CUP WHEEL WITH A SPIRAL FOR QUICK-CHANGE MOUNTING;

z_36

36  -  DISC WHEELS WITH THREADED INSERTS; 3601  -  DISC WHEELS WITH THREADED INSERTS AND PERFORATION HOLES; 3603  -  DISC WHEELS WITH THREADED INSERTS, RECESSED ON THE MOUNTING SIDE; 3610  -  DISC WHEELS WITH THREADED INSERTS AND INCISIONS; 3612  -  DISC WHEELS WITH THREADED INSERTS, RECESSED ON THE WORKING SIDE;

z_27b

27 - DEPRESSED CENTRE GRINDING WHEELS; The Type 27 grinding wheels are a very popular group of general purpose and specialized abrasive tools intended for rough grinding on various materials. They are commonly used in building, shipbuilding, metal, foundry, engineering, chemical and other industries as well as in smaller workshops ...

z_41

41  - FLAT CUTTING-OFF WHEELS; 42  - DEPRESSED CENTRE CUTTING-OFF WHEELS; The Type 41 and Type 42 grinding wheels make a numerous, popular group of general purpose and specialized abrasive tools intended for cutting-off various materials ...

z_trzpien

5210 - MOUNTED POINTS, CYLINDRICAL; 5201 - MOUNTED POINTS, FLAT WITH CONICAL STRENGTHENING; These mounted points are intended for manual grinding. Used for workpieces of cast iron, steel, cast steel. They may be operated on portable pneumatic and electric direct drive grinders.

z_segmenty

GRINDING SEGMENTS AND WHETSTONES; The straight and shaped abrasive segments are intended for rough and finish grinding of flat workpieces made of hard and soft steels, cast iron, cast steel, non-ferrous metals, terrazzo, stones.